RAVI 'S STANLEY MEYER REPLICATION WATER FUEL CELL -008



Uploaded by: raviwfc
Video Description:
Started WFC at 0.5 Amp input again. WFC still leaking at the points where leads come out.
Pl check the following links for replication info about this WFC: http://www.panaceauniversity.org/Ravi%20Cell.pdf (For the circuit use the pg.25 schematic but with individual ferrite core rods straight wound for the Inductors rather than a single rod and bifilar wound--not recommended) Forums
: http://www.oupower.com/phpBB2/viewtopic.php?t=1602 http://www.overunity.com/index.php/topic,3079.0.html For Downloads of Water Fuel Cell Files: http://www.hotlinkfiles.com/browse/srawofni/33693 (or) http://www.hotlinkfiles.com/browse/waterfuel/42765 http://waterfuel.t35.com/wf_meyer_ravi.h
tml Dave Lawton Approved Shop for components & kits of WFC:
http://www.courtiestown.co.uk/batteries/shop.htm R.


Tags for this video: car cell dave engine fuel HHO hydrogen hydroxy ic joe joe's lawton meyer raju ravi ravi's ravzz stanley water wfc

Find more videos in the "People" category
See more videos uploaded by raviwfc

Related Videos
RAVI 'S STANLEY MEYER REPLICATION WATER FUEL CELL -009Dave's Cell Without Inductors or AlternatorRAVI 'S STANLEY MEYER REPLICATION WATER FUEL CELL -001
ravi-s-stanley-meyer-replication-water-fuel-cell-009.htmlravi-s-stanley-meyer-replication-water-fuel-cell-009.htmlravi-s-stanley-meyer-replication-water-fuel-cell-009.html
Original Meyer Water Fuel Cell c.1990RAVI 'S STANLEY MEYER REPLICATION WATER FUEL CELL -003Hot HHO
ravi-s-stanley-meyer-replication-water-fuel-cell-009.htmlravi-s-stanley-meyer-replication-water-fuel-cell-009.htmlravi-s-stanley-meyer-replication-water-fuel-cell-009.html


Share This Video:       StumbleUpon       del.icio.us       Reddit       digg       Furl       Spurl       Simpy       YahooMyWeb


Comments for this video: Show || Hide
Comments for this video on YouTube
Try to use low ... ( 11 months ago by MINIBNRR)
Try to use low voltage AC current and pulse that.
you people are all ... ( 11 months ago by msdnvp)
you people are all doing it wrong !!! use microwaves to hit that damm water it works !
Ive free sourced ... ( 11 months ago by raviwfc)
Ive free sourced what I did & I dont intend to sell it aswell its free for everyone who can make it. You can find the them on oupower dot com and overunity dot com. Do a google search with " ravi water fuel" youll find the exact threads on these forums and all the vids. Good Luck R.
hhhm talk to me ... ( 11 months ago by Arrpegiofromhell)
hhhm talk to me about it! i wanna know
if voltage ... ( 11 months ago by rednaell)
if voltage potential is what is creating the gas then the wire would not have burnt like that. I think that there is a special currentat a specific freqency going on there that does this process
If you look at the ... ( 11 months ago by raviwfc)
If you look at the specific resistance of SS 316L....its very very high.....it was working like a resistor. Once the length of the SS wire was shortened this problem was rectified. R.
there are thousands ... ( 10 months ago by theoneagain)
there are thousands of us trying to replicate the meyer effect we are getting closer we need to keep the info underground lets get our engines running for fuck all . I think the voltage intensifier circuit needs further study
i just cant wait ... ( 10 months ago by theoneagain)
i just cant wait for that day with a 100 percent sucessful replication with all the electronics disclosed for overunity production at 300 percent hmmm No more gasoline for me
Panacea-Bocaf is ... ( 10 months ago by raviwfc)
Panacea-Bocaf is doing an independent replication with four different units...once successful, detailed info which even a person with minimal engineering skills would be able tomake it. theyre making vids of these to be released for easier understanding. R.
Do a search of " ... ( 10 months ago by raviwfc)
Do a search of "bigfatpothead" on the youtube...he's successfully integrated this unit to his vehicle and claims over 60% gain in mileage. R.
Hi Ravi. Let us ... ( 10 months ago by rednaell)
Hi Ravi. Let us know when they release their info if they are sucessful.
Are you using an RF frequency?
I don't know if we ... ( 10 months ago by cmwslw)
I don't know if we can take him seriously. Just look at his videos. "Weed under a microscope?"
Does Meyer's device ... ( 10 months ago by cmwslw)
Does Meyer's device work with flat stainless plates? I'm having trouble acquiring cheap SS tubes.
Also, do you use ... ( 10 months ago by cmwslw)
Also, do you use the circuit as described in the D14 PDF? I am thinking about building it, but I just want to make sure if that is the right one to build.
Check his vids.... ... ( 10 months ago by raviwfc)
Check his vids....he does have something working including the vids of his intergration...nothing to lose I guess. R.
Yes D14 crt ...but ... ( 10 months ago by raviwfc)
Yes D14 crt ...but add the VIC as per Stans US patent 4936961...he gives detailed specs of the VIC build. R.
As per Stans ... ( 10 months ago by raviwfc)
As per Stans Canadian Patent... 2 parallel tubes are 3.75 times more efficient than plates and concentric tubes (ie more than 2 tubes) are 2.5 times more efficient than plates. SS 316L seamless tubes are pretty expensive....you could try SS 304L seam less but the brown muck generation would not stop for a long time compared to 316L R.
Will do. RF...no.. ... ( 10 months ago by raviwfc)
Will do. RF...no.....the frequency of your WFC depends on the build and the water contaminants...sound complicated but once you build it its easy to find the right point for max generation after youve conditioned the tubes.. R.
the one you see in ... ( 10 months ago by raviwfc)
the one you see in the above vid is the D14 crt with the inductors...the VIC addition and bifilar winds on the inductors improved the efficiency even more...didnt post that info due to the risks involved :( ...but someone from panacea had posted the pics of my bifilar inductors generation on the overunity (dot) com thread....this addition increased the efficiency by 10CC for 20 secs at 0.5A 12V I/P to the freq gen. and there was further improvement with the VIC addition after this. R.
Hello again Ravi. ... ( 10 months ago by mjchauffe)
Hello again Ravi. Can you give us specific details and specs of the power supply which you used to power your D 14 pulse generator circuit in the video? (brand name details if possible?) What is the max amp range and impedance of your power supply? Thanks.
Its a 10A 12V DC ... ( 10 months ago by raviwfc)
Its a 10A 12V DC converter from 240V AC mains. The freq gen would work even on a car battery so it doesnt matter where you get the DC input from. I've tried it with a car battery as input and it works fine. R.
why you say notting ... ( 10 months ago by rednaell)
why you say notting about the frequency you use ?
I havent tried to ... ( 10 months ago by raviwfc)
I havent tried to measure the frequencies...it was done totally based on visual generation and volumetric measurements...the freq gen settings would vary with the water you use...I've tried different water from various sources..tap, stream, lake, underground(bore well),... the settings vary for all these...there is no thumb rule frequency as such. The tap water at your place would vary from mine due to the variation in the contaminants present...
The wires youre ... ( 10 months ago by raviwfc)
The wires youre talking about are from previous trials..theyre heat sinks and are not connected to anything...I just used the connectors at the bottom of that setup as I have 18 leads going into the WFC. Check the bifilar wound pics on overunity thread where you can see the new connectors are before and after the 9 inductors. R.



Tell a friend:


URL 
Embed Code 



Tips to help you create better videos

1. Eye Candy.
Think about some of your favorite videos, ask yourself, what interesting shots and b-roll need to be captured to make your video entertaining to watch.

2. Good Lighting.
The main difference between amateur and professional videos is the quality of the lighting. Poor lighting creates graininess and poor quality videos too. (*Hint* In most studios, the lights and the cameras can be adjusted up and down to get the correct amount of light.) For your home studio make use of fluorescent light bulbs. These bulbs produce a nice soft light with no harsh shadows. You can buy fluorescent light kits or you can save a lot of money and make your own fluorescent light box. It is best to use a three point lighting system which is fairly standard in most studios.

3. Tripod.
Use a tripod for shake free shooting. Tripods come in all sizes and quality. Most camcorders used today are only small and weigh very little so there is no need to buy a tripod to suit a heavy professional video camera.

4. Microphone.
The built in microphone on your camcorder is not the best to use if you can avoid it. Buy a directional one that can be mounted on top of your camcorder. Otherwise mount the microphone on a boom or support just out of view of the camcorder but close to the subject. Another option is to use a microphone that clips onto your lapel and as used by newsreaders on television. These are very effective and can be purchased for less than $50. No need to buy a wireless unit, but you need enough cable to run from the camcorder remote microphone, up the inside of your shirt and to your lapel. Bear in mind that you will normally be seated within six feet of the camcorder so the microphone should have plenty of cable.

5. Avoid Zooming and Panning.
Avoid zooming in and out and panning from side to side as much as possible. It is recommended that you set the zoom prior to recording.

6. Pre-Roll and Post-Roll.
Allow a few extra seconds after starting and before stopping the camcorder and the actual start and finish of the action you want to record. This allows for better editing once the shooting is over. Not allowing for the pre-roll and post-roll can make editing difficult. If you are filming yourself then start the camcorder recording with the remote control, wait six seconds before you start talking and at the end let the camcorder run an extra six seconds before stopping. This will give you plenty of time when editing.

7. Remember It is A Small Screen.
When shooting videos to add to your web site, normally the player will be 320 x 240 so avoid wide scenes, keep it close to see the detail. If you are filming yourself talking, you should be within six feet of the camera and preferably from the waist up. Keep the content simple and uncomplicated, do not have much happening in the video and keep it quiet-on-the-set.

8. Think Like a Photographer.
When shooting a video, do it like a photographer taking individual shots. Plan your video shoot, record for a short while from one position then stop recording, reposition the camera or yourself then shoot again. This will reduce excessive camera movement in your video. Using these tips will ensure that you can shoot and produce quality website videos of a better quality than most people. Remember, practice makes perfect and soon you will be getting great results on the first take.

9. Look at the Details.
Sometimes, you are so focused on your subject that you do not notice the surrounding elements of the scene. Only later, when you are reviewing the footage do you notice an unsightly trash can in the background or a tree sticking out of your subjects head. I like to scan the video screen carefully before shooting to make sure there is nothing in the shot that I may have overlooked. You may be surprised what you find!

Use our search feature, at the top of the page, to find videos about your favorite topics. There are tons of videos, for example, type in "Bikini contest", "Body building", "Guitar lesson", or "How to (anything)". Search for "Commercial", you will see cool ads and funny commercials. Notice the video techniques used to capture each video, you may very well find many helpful tips and tricks to use as well as many techniques to avoid when making your own videos... have fun.